In this example, we’re going to look at the 777 and 767 Sub-Series trend over a 10-year period between 2010 and 2020 for passenger aircraft.
On the Aircraft section, select the Trend tab.
Select to group aircraft by Aircraft Type Sub-Series.
Select a Trend Metric of Total In Service.
In the Quick Filter Search (QFS) enter “777”, and select 777 under Aircraft Type.
In the QFS type “767”, and select 767 under Aircraft Type.
In the QFS type “passenger”, and select Passenger under Primary Usages.
In the QFS type “in service”, and select In Service under Status.
The Trend period will default to 2012 – 2016 in annual intervals. Select the Period selector from the top left of the page, and change the period to 2010 – 2020. You should now see around 12 rows in the results grid.
In this example, we are going to look at the annual revenue for European Mainline Airlines between 2010 and 2015; we are going to limit our results to only those airlines that have exceeded $100m in annual revenue for at least one of the intervals during the 2010 – 2015 range.
Start on the Companies Section, and select the Finance & Traffic tab.
Accept the default column option of Company Type.
Click the Add Filter Menu button, and then select the Company Category option from the menu on the left. In the Company Type list, select Mainline.
Then select the Company Location option from the menu on the left, and select Europe from the Regions list.
Now select the Revenues option from the left menu, this is under the Finance heading. Find the Total Revenue (US$m) range filter, and enter “100” into the From field. In the Date range and interval filter on the same page, make sure the interval is set to Yearly, and enter the date range 2010 to 2015. Now click the Accept button from the top right of the page.
Now use the calendar picker on the search page and set the interval and range to match what you entered into the filter i.e. Yearly, 2010 – 2015. Your results should look like those shown below.
In this example, we are going to review the development of helicopter fleet and see if the industry is getting more or less safe in the last 10 years by looking at exposure and risk. For this, we shall review how the number of accidents changed versus changes in active helicopter fleet.
Start in the Aircraft section, Trend tab.
Adjust the dates to show the last 10 years.
In the QFS type in Helicopter, select Helicopter as Aircraft Market Sector filter.
Set grouping as Market Class to get more insight into how the fleet of different classes of helicopters has been developing.
Select metrics ‘Total in Service’, ‘Total On Order’ and ‘Total in Storage’ to focus on the most relevant figures. Your screen would look like the image shown in Figure 1.
In this example, we are going to review the fleet of British Airways and any accidents related to the operator or the fleet in the past 5 years (01/01/2011 – 31/12/2015).
Start in the Aircraft section, Detail tab.
In the QFS type in British Airways, select British Airways as Operator filter. Similarly, add Status & Usage filters as ‘In Service’ and ‘Storage’, you are now viewing the currently active fleet of British Airways.
Go to the Trend view, select to group by status and adjust the dates to show the last 5 complete years (2011-2015) to see how it has developed in the past 5 years. Select metric ‘Total aircraft’ to focus on the most relevant figures. Your screen would look like the image shown in Figure 1.
In this example, we are going to review the number of accidents that are of all-risk (that is, not resulting from acts of war) and were total losses to commercial aircraft, for the ten ear period 01/01/2006 to 30/12/2015.
Start in the Accidents section, Detail tab.
Click on the ‘Add filter menu’ button.
Go to the Date & Identification filter and selecte the date range for 01/01/2006 to 30/12/2015.
Go to the Event Circumstances filter, select Accident Category as ‘All Risk’.
Go to the Loss Type filter, select ‘Total Loss’ filter.
Go to the Market Grouping At Accident filter, select ‘Commercial’ in Market Sector at Accident.
Click Accept to run the search. Your screen will look like the image shown in Figure 1 below.
In this example, we are going to look for the aircraft currently leased from SMBC Aviation Capital, and then we’re going to see which aircraft types are in service with which operators, along with the contact information for those operators.
Start on the Aircraft Section, Detail tab.
In the Quick Filter Search (QFS) type “SMBC” and select SMBC Aviation Capital from the Manager category.
In the QFS type “in service” and select in service from the Status category. You should see around 380 aircraft in the grid.
Now select the Summary Tab and group by Operator and Aircraft Type. You should see around 140 rows in the grid.
As you have filtered by in service aircraft only, it is worth customising the columns in the grid, I’d suggested including Total In Service, Age Range, and Average Age. Your screen should appear similar to that shown in Figure 1.
Sourcing people contact details (name, job title, email etc.) within the industry; be it for operator, manager or MRO organisations is a common task for many Fleets Analyzer users. There are two main ways to do this: